Serial port
Section
Description
IX10
Expand a device to be able to access the web UI for the device and configure the
device
device to use RealPort.
RealPort
Click RealPort Devices at the bottom of the screen to display a list of devices that are
Devices
configured to use
Connect to and access the Digi Navigator
Your device must be connected to your network or a laptop before you can access the Digi Navigator.
Discover the IP address when connected to a network
To discover the IP address for a IX10 device connected to your network, the Digi Navigator uses the
HTTPS service by default. Other services can be used, if needed.
1. Make sure your
2. Launch the Digi Navigator.
3. Click Filters from the green toolbar to expand the toolbar and display the filter options.
4. In the Services Filters section, click the enable button to enable the services that you want to
use to find an IP address.
5. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the
filters.
Discover the IP address when not on a network
If the IX10 device is directly connected to a computer or connected to a network with no DHCP server,
a default IP address is found for the device. You can specify the filters used to find a default
IP address.
IX10 User Guide
Access web UI: Click Open to
n
Configure RealPort: Click Configure device for Realport and Configure this
n
PC for RealPort to
configure the device to use
RealPort.
device is connected to the network
Digi Navigator application
access the web
UI for the device.
RealPort.
and the Digi Navigator is installed.
200