Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 487

Procedure 6-13
Disk Drive Full
Step Description
145
Enter the following command to verify whether any AMACRD files are outside of the
index.
>LSTDIR FILE AMACRD 1 255 (cr)
System responds with a directory listing of the AMACRD files on disk.
Example:XX AMACRD XX 02 96 151 X XXXX
XXXXXXX XX XXXXXX 020304 007500
1 FILES LISTED
where:
02- version number
96- year file was created
151- julian date file was created
020304- starting sequence number of this file
007500- number of blocks in this file
If data needed by data center is outside the index, look for version that contains the
sequence number. Refer to the procedure in the Index Corruption Recovery Procedure
subsection to create an index that contains the needed data. If disk usage is high and
there are AMACRD files that did not appear in the IDXMAINT DIR CLOSED AMA listing
from step 5, proceed to step 12.
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-610 Maintenance Procedures Guide 6-49
Sheet 4 of 5