Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 380

4-220 Section 060-INDP-410 Command and Message Guide
Table 7-157
LINK TRANSMIT WINDOW message
2 6 1
Customer-Selected Alarm Level
2 6 2
Other Alarm Indications
2 6 3
System Recovery Action
2 6 4
Craftsperson Activity:
Table 7-158
LINK xx RETRY THRESH EXCEEDED, MSG: mm nn message
2 6 5
LINK xx RETRY THRESH
EXCEEDED, MSG: mm nn
Display: Log message
2 6 6
Alarm Level:
N/A
2 6 7
Customer-Selected Alarm Level
2 6 8
Other Alarm Indications
2 6 9
System Recovery Action
2 7 0
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
Link is terminated by the BMC.
If seen repeatedly, refer to the Polling Diagnostic
Procedure in the Maintenance Procedures Guide
section.
Cause: output when, during the polling process, the
HOC responds with a NAK or WAK message more than
32 times.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
Link is disconnected by BMC.
If seen repeatedly, refer to the Polling Diagnostic
Procedure in the Maintenance Procedures Guide
section.