Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 149

Table 3-3
BMC commands
Command Description
CLK Display BMC system time
CLRSTATS Clears today's statistics files
(record may be lost)
CLSACT Close specified file to further
writes
CP Perform specified actions on the
Communication Processor
DELFILE Delete specified file
DISK Define/examine operating
parameters of the BMC disk
drives
DMASTAT Examine current or last status of
BMC Direct Memory Access
functions
DMPFILE Output contents of the specified
file in HEX
DPRTST Test BMC RAM
ERRMAP Examine/set alarms and alarm
handling
IDXMAINT Control status and handling of
system files
KYWD Used to examine or change the
remote BMC-to-HOC password
LINIT Initialize BMC receive data buffers
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-310 System Administration Guide 3-31
Priority
Locked at priority 1
Mainly System Administration, Maintenance
may require access (Priority 2)
Mainly System Administration, Maintenance
may require access (Priority 2)
Maintenance requires access (Priority 2)
Mainly System Administration, Maintenance
may require access (Priority 2)
Mainly System Administration, Maintenance
may require access (Priority 2)
Mainly maintenance (priority 2)
Mainly maintenance (Priority 2)
Mainly maintenance (Priority 2)
System Administration, and Maintenance
(Priority 2)
Mainly System Administration, Maintenance
may require access (Priority 2)
System Administration only (priority 3)
Mainly System Administration, Maintenance
may require access (Priority 2)
Sheet 2 of 4