Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 366

4-206 Section 060-INDP-410 Command and Message Guide
Table 7-141
INCOMING CALL REJECTED nn message
1 6 3 (log message)
INCOMING CALL REJECTED nn
Display: Log message
1 6 4
Alarm Level:
N/A
1 6 5
Customer-Selected Alarm Level
1 6 6
Other Alarm Indications
1 6 7
System Recovery Action
1 6 8
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Where: nn = reason for call rejection:
01 = remote station password rejected.
02 = local password rejected.
Cause: output to indicate that the remote station
request to set up a data link was denied due to a
security violation.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
Link is disconnected by BMC.
Verify the correct KYWD and COLLPSW settings with
HOC personnel.