Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 420

4-260 Section 060-INDP-410 Command and Message Guide
Table 7-204
WRITE TO DISK FAILED message
2 0 5
WRITE TO DISK FAILED
Display: Log message
2 0 6
Alarm Level:
N/A
2 0 7
Customer-Selected Alarm Level
2 0 8
Other Alarm Indications
2 0 9
System Recovery Action
2 1 0
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Cause: a failure occurred when trying to write a block to
disk during a download session.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None; task is terminated
a. Switch processors.
b. Retry the task.
c. If the message does not repeat, procedure complete. If
unsuccessful, go to step d.
d. Call for technical assistance.