Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 505

Procedure 6-23
AMAIDX Missing Recovery
Step Description
32
Examine available AMACRD files in the directory by typing:
>LSTDIR FILE AMACRD 1 255 (cr)
33
Note sequence number in the versions that are displayed. For example:
00 AMACRD 60 78 95 349 0 1531
01006C00 00 0EE509 063402 000076
78 is the file's version number. 063402 is the version's beginning block number.
34
Contact data center. Verify what sequence numbers have been completely processed and
will not need to be repolled, as well as what sequence number the data center needs to
begin normal polling.
35
Determine which versions contain the sequence numbers obtained from the data center in
step 3.
36
Create an AMAIDX containing the AMACRD versions the data center needs to poll.
>IDXMAINT CREATE DIR AMA ver1 seq_num ver2 (cr)
where:
ver1- starting version number
seq_num- first primary block sequence number
ver2- version number in which the selected sequence number occurs.
37
Display contents of new index using the command:
>IDXMAINT DIR CLOSED AMA 255 (cr)
Example response:
VS 81: .3451 BLKS, 30 DA TO DLET, AMA SEQ :000000
VS 82: ....36 BLKS, 30 DA TO DLET, AMA SEQ :003451
VS 83: ....36 BLKS, ....36 TO POLL, AMA SEQ :003487
VS 84: ..1389 BLKS, ..1389 TO POLL, AMA SEQ :003523
END OF AMAIDX FILE
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-610 Maintenance Procedures Guide 6-67
(Sheet 1 of 2)