Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 405

Table 7-187
RAM TEST FAILED message
1 0 5
Customer-Selected Alarm Level
1 0 6
Other Alarm Indications
1 0 7
System Recovery Action
1 0 8
Craftsperson Activity:
Table 7-188
REPORT IN PROGRESS message
1 0 9 REPORT IN PROGRESS
Display: Maintenance terminal
1 1 0
Alarm Level:
N/A
1 1 1
Customer-Selected Alarm Level
1 1 2
Other Alarm Indications
1 1 3
System Recovery Action
1 1 4
Craftsperson Activity:
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-245
Type:Level:
Default:
Status Panel:MajorAudible:Major
Customer-Selected
Status Panel:Audible:
Processor switch.
Refer to the DRAM PCA Diagnostic Procedure in the
Maintenance Procedures Guide section.
Cause: output when a report request is attempted while
a report is being generated.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None, response to keyboard entry.
Attempt report at a later time.