Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 385

Table 7-163
NO BLOCK LAST ii MINUTES message
2 9 8
Other Alarm Indications
2 9 9
System Recovery Action
3 0 0
Craftsperson Activity:
Table 7-164
NO BOOT ON DISK message
3 0 1
NO BOOT ON DISK
Display: Log message
3 0 2
Alarm Level:
N/A
3 0 3
Customer-Selected Alarm Level
3 0 4
Other Alarm Indications
3 0 5
System Recovery Action
3 0 6
Craftsperson Activity:
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-225
Default:
Status Panel:MinorAudible:Minor
Customer-Selected
Status Panel:Audible:
Alarm, no processor switch.
Verify traffic/AMA data level in Switching System is at
least one block per ii minutes. Also, refer to the No
Block Last Hour Procedure in the Maintenance
Procedures Guide section.
Cause: output when a booting operation failed due to
the lack of, or the inability of the disk system to find the
file BOOTFL on disk. Associated with other alarms.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None
Refer to the Boot Recovery Procedure in the
Maintenance Procedures Guide section.