Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 416

4-256 Section 060-INDP-410 Command and Message Guide
Table 7-200
UNKNOWN DISK MESSAGE xx message
1 8 1
UNKNOWN DISK MESSAGE xx
Display: Log message
1 8 2
Alarm Level:
N/A
1 8 3
Customer-Selected Alarm Level
1 8 4
Other Alarm Indications
1 8 5
System Recovery Action
1 8 6
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Where: xx = message ID (in hex - 00-FF)
Cause: output whenever a message ID is received by
the MP from the SCSI Interface that is invalid.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None.
If seen repeatedly, replace the SCSI Interface PCA
using the Miscellaneous PCA Replacement Procedure
in the Maintenance Procedures Guide section.