Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 278

4-118 Section 060-INDP-410 Command and Message Guide
Table 4-50
CP BX CODE xx WAS yy message
1 7 5
CP BX CODE xx WAS yy
Display: Log message
1 7 6
Alarm Level:
N/A
1 7 7
Customer-Selected Alarm Level
1 7 8
Other Alarm Indications
1 7 9
System Recovery Action
1 8 0
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Where: xx = expected code.
yy = received code.
Cause: output when the polling task on the MP is
unable to communicate with the CP.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel: N/AAudible: N/A
Customer-Selected
Status Panel:Audible:
Polling ceases.
Refer to the 56K Interface PCA Diagnostic Procedure in
the Maintenance Procedures Guide. If this message is
seen repeatedly from the same processor, refer to the
56K Interface PCA Replacement Procedure in the
Maintenance Procedures Guide section .