Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 336

4-176 Section 060-INDP-410 Command and Message Guide
Table 7-104
DISK: REASSIGN COMPLETED message
1 8 3
Customer-Selected Alarm Level
1 8 4
Other Alarm Indications
1 8 5
System Recovery Action
1 8 6
Craftsperson Activity:
Table 7-105
DISK: REASSIGN DATA NOT RECOVERED message
1 8 7
DISK: REASSIGN DATA NOT
RECOVERED
Display: Log message
1 8 8
Alarm Level:
Major
1 8 9
Customer-Selected Alarm Level
1 9 0
Other Alarm Indications
1 9 1
System Recovery Action
1 9 2
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Type:Level:
Default:
Status Panel:MajorAudible:Major
Customer-Selected
Status Panel:Audible:
Updates bad sector information stored on disk directory
track. Reflected in the DISK USAGE and DISK
REPORT fields.
None.
Cause: this message follows a DISK: COMMAND
ERROR message. The bad sector relocation has failed;
data for this sector is lost.
Reason Code = N/A
Corresponds to ERRMAP entry: DSK CRD HW ERR
System Default:
Type:MajorLevel:2
Type:Level:
Default:
Status Panel:MajorAudible:Major
Customer-Selected
Status Panel:Audible:
Disk system is placed in non-redundant mode.
Refer to the Disk Drive Diagnostic Procedure in the
Maintenance Procedures Guide section.