Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 381

Table 7-159
LOG FILE DELETED message
2 7 1 (log message)
LOG FILE DELETED
Display: Log message
2 7 2
Alarm Level:
No processor switch
2 7 3
Customer-Selected Alarm Level
2 7 4
Other Alarm Indications
2 7 5
System Recovery Action
2 7 6
Craftsperson Activity:
Table 7-160
MPSR ERR message
2 7 7 (log message)
MPSR ERR
Display: Maintenance terminal
2 7 8
Alarm Level:
N/A
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-221
Cause: output when the LOG files are deleted to make
room for primary AMA files; occurs when disk usage
percentage reaches 90% and when the files DA TO
DLET value has reached 0.
Reason Code = 07
Corresponds to ERRMAP entry: DSK 90% PRIMARY
System Default:
Type:MajorLevel:0
Type:Level:
Default:
Status Panel:MajorAudible:Major
Customer-Selected
Status Panel:Audible:
None.
If an alarm is generated, refer to the Disk Drive
Diagnostic Procedure in the Maintenance Procedures
Guide section.
Cause: output when the MP session report task
encounters an error.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A