Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 362

4-202 Section 060-INDP-410 Command and Message Guide
Table 7-136
ILLEGAL USER NUMBER message
1 3 3
ILLEGAL USER NUMBER
Display: Maintenance terminal
1 3 4
Alarm Level:
N/A
1 3 5
Customer-Selected Alarm Level
1 3 6
Other Alarm Indications
1 3 7
System Recovery Action
1 3 8
Craftsperson Activity:
Table 7-137
IMPROPER FILE TYPE message
1 3 9
IMPROPER FILE TYPE
Display: Maintenance terminal
1 4 0
Alarm Level:
N/A
297-6201-502 Standard 01.02 September 2000
Cause: output in response to the PSWD command
when a specified user number in a command does not
exist in the password list. Valid password numbers are
0-9.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None; input is rejected
Refer to the associated command subsection in this
document for correct syntax.
Cause: output in response to the IDXMAINT command,
if the user enters an unknown FILE TYPE keyboard
command argument (valid entries are: AMA or LOG).
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A