Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 387

Table 7-166
NO DATA AVAILABLE message
3 1 3
NO DATA AVAILABLE
Display: Maintenance terminal
3 1 4
Alarm Level:
N/A
3 1 5
Customer-Selected Alarm Level
3 1 6
Other Alarm Indications
3 1 7
System Recovery Action
3 1 8
Craftsperson Activity:
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-227
Cause: output when the sequence number requested
by the HOC in the polling request is not present within
the index for the embedded SELGRP setting.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None.
HOC personnel have attempted to poll a sequence
number using an embedded SELGRP value that does
not contain that sequence number. Refer to the
Secondary Data Polling Procedure in the Maintenance
Procedures Guide section.