Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 273

Table 4-45
COMMAND ALREADY IN PROGRESS message
1 4 5
COMMAND ALREADY IN
PROGRESS
Display: Maintenance terminal
1 4 6
Alarm Level:
N/A
1 4 7
Customer-Selected Alarm Level
1 4 8
Other Alarm Indications
1 4 9
System Recovery Action
1 5 0
Craftsperson Activity:
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-113
Cause: output in response to commands (those which
generate large amounts of output) if the user tries to
execute other commands before completion of the
active command. An I/O process can only be created if
no other I/O task is currently scheduled.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel: Audible:
Customer-Selected
Status Panel:Audible:
None; BMC system ignores the newly input command.
a. Retry command at a later time (wait for the present
command to complete execution).
b. Attempt to abort the current command by issuing the
RSCMD command.
c. If message repeats after 3 retries, call for technical
assistance.