Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 263

Table 4-34
BOOT FILE EMPTY message
7 9
BOOT FILE EMPTY
Display: Log message
8 0
Alarm Level:
N/A
8 1
Customer-Selected Alarm Level
8 2
Other Alarm Indications
8 3
System Recovery Action
8 4
Craftsperson Activity:
Table 4-35
BOTH DISKS FULL message
8 5
(log message)
BOTH DISKS FULL
Display: Log message
8 6
Alarm Level:
two disks 100% = Critical
no processor switch
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-410 Command and Message Guide 4-103
Cause: output because the file, BOOTFL, is found to
contain an empty list (no software in the file) while
attempting a re-boot operation.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:N/AAudible:N/A
Customer-Selected
Status Panel:Audible:
None
Refer to the Boot Recovery Procedure in the
Maintenance Procedures Guide section.
Cause: output when the amount of disk space for
storing AMA data has reached 100 percent of available
space.
Reason Code = 08
Corresponds to ERRMAP entry: DSK STORE LIMIT
System Default:
Type:CriticalLevel:0