Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 390

4-230 Section 060-INDP-410 Command and Message Guide
Table 7-170
NO S/W ON DISK message
3 3 7
NO S/W ON DISK
Display: Log message
3 3 8
Alarm Level:
N/A (other alarms are present)
3 3 9
Customer-Selected Alarm Level
3 4 0
Other Alarm Indications
3 4 1
System Recovery Action
3 4 2
Craftsperson Activity:
297-6201-502 Standard 01.02 September 2000
Cause: output when a program boot from disk failed
when the following events occur:
a. system cannot find one of the files entered in the boot
list.
b. program file does not exist on disk.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type:N/ALevel:N/A
Type:Level:
Default:
Status Panel:Audible:
Customer-Selected
Status Panel:Audible:
None
Refer to the Boot Recovery Procedure in the
Maintenance Procedures Guide section.