Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 621

Table 6-21
56K Crossover PCA (B16) options - part number: NT6M48AA
Device type
(number)
Switch
Note: There are no customer-definable options on this PCA. Information is shown for reference
only. Use this data for verification during initial DPP system installation and/or PCA replacement to
make sure the replacement PCA is set up the same as the PCA being replaced.
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-610 Maintenance Procedures Guide 6-183
Position/setting
None Used
Function Setting
Factory On-site