Nortel DMS-10 Series Installation, Operation And Maintenance Manual page 635

Table 6-23
Bus Terminator PCA options - part number: NT6M68AA
Device type Position/setting
(number)
Strap None used
DIP Switch None used
Rotary Switch None used
Switch None used
Jumper None used
Note: There are no customer-definable options on this PCAs. Information is shown for reference
purposes only. This data is to be used for verification during initial BMC system installation and/or
PCA replacement to make certain that the replacement PCA is set-up the same as the PCA being
replaced.
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
Section 060-INDP-610 Maintenance Procedures Guide 6-197
Function Setting
Factory On-site