Table of Contents
Advertisement
Configure the Connect IT 16/48
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > VPN
3. Expand the OpenVPN section.
4. Define an OpenVPN server.
a. Expand the OpenVPN section.
b. Expand the Servers section.
c. In the Add OpenVPN server field, enter a name for the server.
d. Click Add.
e. The server is enabled by default. Verify that the Enable option is selected.
f. Complete the fields in each of the sections.
5. Define a client.
a. Expand the Clients section.
b. In the Add OpenVPN client field, enter a name for the client.
c. Click Add.
d. Verify that the Enable option is selected.
e. Verify that the Use .ovpn file option is selected.
f. Complete the fields in each of the sections.
6. Click Save or Apply.
Configure an IP tunnel for a VPN
You can configure an IP tunnel for a VPN.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > VPN
3. Expand the IP Tunnels section.
4. In the Add IP tunnel field, enter a name for the tunnel.
5. Click Add.
6. The tunnel is enabled by default. Verify that the Enable option is selected.
7. Complete the fields in each of the sections. To display information about what you should enter
in each field, hover over the field name or click the down arrow and then Help next to each
field.
8. Click Save or Apply.
Back up, restore, and delete the configuration
You can back up, restore, or delete configuration settings for a Connect IT.
Digi Connect IT® 16/48 User Guide
Back up, restore, and delete the configuration
screen.
screen.
40
Advertisement
Table of Contents
