Advertisement
4
Test configuration
1. Insert the RJ-45 diagnostic loop into Port 1:
2. Enter:
User ID root
Password dbps
3. Log in to port 1:
Username root
Password dbps
Verify your connection to the port by typing some text. If the text appears
correctly on the screen, the configuration is correct.
4. Click Close to exit the port.
5. On the left navigation bar, click Serial Port > Connection > Port Title #.
Installation is complete.
6. Configure the device for your application using your browser. To get back
to your Digi Passport after your initial configuration, enter the IP address in
the URL address bar and log in. Use the navigation bar on the left to alter
your configuration.
Below is a list of available adapters and their part numbers.
Connection
Adapters (in quantities of 8)
DB-9M Modem adapter
DB-9F Console adapter
DB-25F Console adapter
DB-25M Modem adapter
DB-25M Console adapter
Order #
Application
76000702 DCE devices such as modems with DB9 female ports
76000671 Bay Accelar, Nortel and other DB-9 DTE
76000673 DTE devices with DB-25 male ports
76000670 DCE devices such as modems
76000672 Oracle SPARC and other DTE devices with DB-25 female ports
Advertisement
