Signal Strength; Exchange Power Tips - Digi Connect IT 4 User Manual

Hardware

Signal strength

The signal bars show the strength of the cellular network connection.
See Cellular network

Exchange power tips

The 4 may include four interchangeable plug tips that allow the Power Supply Unit (PSU) to operate in
most countries. The PSU comes with the United States style plug installed.
To change the plug tip:
1. Place the tip of a small flathead screw driver in the half-circle area below the power prongs,
and push in and upward.
2. Pull off the attached plug converter.
3. Slide the new tip down into place until it clicks.
Note For more information regarding power-tip compatibility with global deployments, visit
www.worldstandards.eu/electricity/plugs-and-sockets/.
Digi Connect IT® 4 User Guide
fallback.
Signal strength
62