Configuration and management
Review Connect IT 16/48 default settings
You can review the default settings for your Connect IT 16/48 device by using the local WebUI or Digi
Remote Manager:
Local WebUI
1. Log into the Connect IT 16/48 WebUI as a user with Admin access. See
for details.
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. Click Device Management to display a list of your devices.
3. Locate and select your device as described in
your
device.
4. Click Configure.
The following tables list important factory default settings for the Connect IT 16/48.
Default interface configuration
Interface type
Wide Area Networks (WAN)
Digi Connect IT® 16/48 User Guide
Use Digi Remote Manager to view and manage
Preconfigured
interfaces
Devices
ETH1
n
n
ETH2
n
n
SFP1
n
n
Review Connect IT 16/48 default settings
Using the web interface
Default configuration
Ethernet:
Firewall zone: Internal
n
WAN priority: Metric= 1
ETH1
n
IP Address: DHCP
n
l
client
Digi SureLink
n
enabled for IPv4
Ethernet:
Firewall zone: Internal
n
WAN priority: Metric= 5
ETH2
n
IP Address: DHCP
n
l
client
Digi SureLink
n
enabled for IPv4
Ethernet:
Firewall zone: Internal
n
WAN priority: Metric= 1
SFP1
n
IP Address: DHCP
n
l
client
Digi SureLink
n
enabled for IPv4
TM
TM
TM
29