Configure Connect It Using Remote Manager; Before You Begin - Digi Connect IT 4 User Manual

Configure Connect IT using Remote Manager

The following actions are typically only performed by your network administrator.

Before you begin

Connect to Remote Manager
You must configure your computer to connect to the Connect IT, and then enable the Connect IT to
connect to Remote Manager. You have the following options:
Connect the Connect IT 4 to your network When the Connect IT 4 has an internet
n
connection, the Connect IT 4 will download its configuration settings from the legacy Digi
aView portal by default. This configuration then automatically re-configure the Connect IT 4 to
sync with Digi Remote Manager. For instructions, see
If you do not connect the Connect IT 4 to your network, you can configure your computer to
n
connect to the Connect IT 4, and then manually enable the Connect IT 4 to connect to the Digi
Remote Manager. For instructions, see
Create a Remote Manager account
You must create a Remote Manager account
Manager inventory.
Note For more detailed information about using Remote Manager, see the
Guide.
Digi Connect IT® 4 User Guide
Connect the hardware to a
Enable local management for Connect IT
and add your Connect IT devices
network.
4.
to your Remote
Digi Remote Manager User
15