Chapter 13 Warning Codes - Delta IED-S Series User Manual

 If you see code number from 1001 to 1100 display on the keypad, they are the drive's warning codes.
For more information on these warning codes, see Chapter 13 Warning Codes in the VFD-ED user
manual. Ignore the thousands digits when referring to the VFD-ED user manual.
Code# KPC-CC01 Display
1109
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1110
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1111
Action
Related Parameters
Reset Method

Chapter 13 Warning Codes

Warning Name
Braking force, Under Warning occurs when running the manual braking force
test test
Action and Reset
The operation contactor outputs, but the brake contactor does not output. Then,
the system outputs the torque, and gradually increases to Pr.03-61 (Brake Test
Output Torque) setting value.
Pr.03-60–Pr.03-67 (parameters relate to braking force test)
Resets automatically once the action is finished
Warning Name
Inspection, Warning occurs when Pr.03-67 (Brake Test Starting) is
Unqualified, Braking set to 1, and the elevator is neither in an emergency
force operation mode nor in control panel inspection mode.
Action and Reset
Pr.03-67 (Brake Test Starting) is set to 0, and the fault code F150 (Unqualified
braking force test) occurs after five seconds.
Pr.03-67 (Brake Test Starting)
Resets automatically after five seconds
Warning Name
Warning occurs when Pr.03-67 (Brake Test Starting) is
Leveling, Unqualified,
set to 1, and the elevator car does not stop at the
Braking force
leveling position.
Action and Reset
Pr.03-67 (Brake Test Starting) is set to 0, and the fault code F150 (Unqualified
braking force test) occurs after five seconds.
Pr.03-67 (Brake Test Starting)
Resets automatically after five seconds
13-1
Chapter 13 Warning Codes | IED-S
Description
Description
Description