Delta IED-S Series User Manual page 380

Code# KPC-CC01 Display
1134
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1135
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1136
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1137
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1138
Action
Related Parameters
Reset Method
Warning Name
Motor temperature at Warning occurs when motor temperature at the rear
rear door overheats door (MI=118) overheats.
Action and Reset
All call signals are cancelled, and the rear door open/close signal does not
output.
N/A
The warning is automatically cleared after the input signal is reset.
Warning Name
Warning occurs when CAR+/CAR- communication
CAR+/CAR- time-out portal is not successfully connected within default
setting time.
Action and Reset
Immediately acts
N/A
The warning is automatically cleared once the communication is correctly
connected.
Warning Name
Warning occurs when Pr.13-21 (Motor Auto-tuning) is
Running time-out not set to 0, and the RUN command does not execute
during auto-tuning within 10 seconds, and then Pr.13-21 is automatically
set to 0.
Action and Reset
Pr.13-21 (Motor Auto-tuning) is set to 0
Pr.13-21 (Motor Auto-tuning)
Resets automatically
Warning Name
Warning occurs when motor auto-tuning is not finished
within 120 seconds during motor auto-tuning, and
Auto-tuning time-out
auto-tuning automatically stops, and then Pr.13-21
(Motor Auto-tuning) is set to 0.
Action and Reset
Pr.13-21 (Motor Auto-tuning) is set to 0 and motor auto-tuning stops.
Pr.13-21 (Motor Auto-tuning)
Resets automatically
Warning Name
Warning occurs when coin cell battery is at low voltage.
Coin cell battery is at
The warning is automatically cleared after 10 seconds.
low voltage
Note that a low-voltage battery causes incorrect clock.
Action and Reset
This warning will be recorded in fault records
N/A
Resets automatically
13-5
Chapter 13 Warning Codes | IED-S
Description
Description
Description
Description
Description