Table of Contents
Advertisement
3.
Keypad Locked
Example: Save parameters in the keypad.
String & Symbol Table:
！＂＃＄％＆＇（）＊＋，－．／０１２３４５６７８９：；＜＝
＞？＠ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ
［＼］＾＿｀ａｂｃｄｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘ
ｙｚ｛｜｝~
Lock the Keypad
Use this function to lock the keypad. The main screen does not display
"keypad locked" when the keypad is locked; however it displays the message
"Press ESC 3 sec to unlock key" when any key is pressed.
When the keypad is locked, the main screen does
not display the locked status.
Press any key on the keypad; a message displays as
shown on the left.
9-9
Chapter 9 Digital Keypad | IED-S
1. Go to Copy Parameter.
2. Select the parameter group to copy, and
then press ENTER.
1. Select 2: VFD->Keypad.
2. Press ENTER to go to the "Save in the
keypad drive" screen.
Press Up or Down to select a symbol.
Press Left or Right to move the cursor to
select a filename.
After you confirm the filename, press ENTER.
Copy parameters until it is done.
After copying parameters, the keypad
automatically returns to this screen.
Press Right to see the date the parameters
were copied.
Press Right again to see the time the
parameters were copied.
Advertisement
Table of Contents
