Delta IED-S Series User Manual page 379

Chapter 13 Warning Codes | IED-S
Code# KPC-CC01 Display
1128
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1129
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1130
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1132
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1133
Action
Related Parameters
Reset Method
Warning Name
Warning occurs when:
Elevator lock main 1. Pr.03-48 is set to non-service floor
landing warning 2. Pr.03-48 is larger than the highest floor
3. Pr.03-48 is smaller than the lowest floor
Action and Reset
Immediately acts
Pr.03-48 (Elevator Lock Main Landing)
Resets automatically
Warning Name
Warning occurs when:
Elevator main landing 1. When Pr.03-05 is set to non-service floor
warning 2. Pr.03-05 is larger than the highest floor
3. Pr.03-05 is smaller than the lowest floor
Action and Reset
Immediately acts
Pr.03-05 (Main Landing for Standby While Idling)
Resets automatically
Warning Name
Warning occurs when:
Main landing at fire 1. Pr.03-49 is set to non-service floor
emergency warning 2. Pr.03-49 is larger than the highest floor
3. Pr.03-49 is smaller than the lowest floor
Action and Reset
Immediately acts
Pr.03-49 (Primary Main Landing at Fire Emergency)
Resets automatically
Warning Name
Warning occurs when fireman class II signal is ON and
Fireman class II invalid
fireman class I signal is OFF.
Action and Reset
Fireman class II is not activated
MI=47 FIRS2 (Fireman class II), MI=46 FIRS1 (Fireman class I)
Resets when signals of fireman class II and fireman class I are identical (both
are ON or OFF)
Warning Name
Motor temperature at Warning occurs when motor temperature at the front
front door overheats door (MI=117) overheats.
Action and Reset
All call signals are cancelled, and the front door open/close signal does not
output.
N/A
The warning is automatically cleared after the input signal is reset.
13-4
Description
Description
Description
Description
Description