Table of Contents
Advertisement
Chapter 11 Summary of Parameter Settings | IED-S
Pr.
Parameter Name
Setting Range
Default
189: Upward target error in direct docking
190: Downward target error in direct docking
191: INV DRV DIR error
192: INV VFD DIR error
193: VFD DRV DIR error
194: ULS1 over-speed
195: ULS2 over-speed
196: ULS3 over-speed
197: ULS4 over-speed
198: DLS4 over-speed
199: DLS3 over-speed
200: DLS2 over-speed
201: DLS1 over-speed
202: Target error 1
203: Target error 2
204: Target error 3
205: Target error 4
221: GSH (Gate safety hatch high voltage) is OFF
222: GSH (Gate safety hatch high voltage) contact
sticking
223: DSH (Layer door safety hatch high voltage) is
OFF
224: DSH (Layer door safety hatch high voltage)
contact sticking
225: Front door open time exceeds
226: Front door close time exceeds
227: Rear door open time exceeds
228: Rear door close time exceeds
229: Front door close times exceed
230: Rear door close times exceed
231: GSL (Gate safety hatch low voltage) is OFF
232: GSL (Gate safety hatch low voltage) contact
sticking
233: DSL (Layer door safety hatch low voltage) is
OFF
234: DSL (Layer door safety hatch low voltage)
contact sticking
235: Discharge resistance temperature is too high
236: Watchdog action
1109: Braking force, Under test
1110: Inspection, Unqualified, Braking force
1111: Leveling, Unqualified, Braking force
1112: Braking force, Test, Qualified
1113: Fault, Unqualified, Braking force
11-9
Advertisement
Table of Contents
