Delta IED-S Series User Manual page 174

10-2-11 Pr.13-24 Encoder Input Type Setting
 Normally set Pr.13-24 to 1 first, and then change to 2 if fault code E042 occurs.
 When you set Pr.13-22 to 3, 4, 5 or 6, you can set Pr.13-24 only to 0, 1 or 2, and you cannot
use 3, 4 and 5.
 You must enter the correct pulse type for stable control.
Press
Press
10-7
Chapter 10 Auto-tuning Process | IED-S