Table of Contents
Advertisement
Chapter 9 Digital Keypad | IED-S
Other Displays
When a fault or warning occurs, the menu displays the following screens.
1. Press ENTER to RESET. If there is no response, contact your local distributor for instructions to return the
equipment to the factory. To view the DC bus fault voltage value, output current and output voltage, press MENU
and then choose Fault Record for details (see the descriptions in the above #4 Fault Record).
2. Press ENTER again. If the screen returns to Main page, the fault is cleared.
When a fault or warning code occurs, the screen backlight blinks until the fault or warning is cleared.
Choose the correct communication port, and then click OK.
Before using the user-defined Start-up screen and user-defined Main screen,
you must preset the Start-up screen and the Main screen as user-defined.
If you do not download the user-defined screens to the KPC-CC01, the
Start-up screen and the Main screen are blank.
Fault
ocA
Oc at accel
9-16
Start to upload parameters to VFDSoft.
Uploading parameter is completed.
Warning
CE01
Comm. Error 1
Advertisement
Table of Contents
