Table of Contents
Advertisement
Display Setup screen.
2. Back-Light
3. Text Color
1 :
2 :
3 :
9-11
Chapter 9 Digital Keypad | IED-S
For example, increase the contrast to +10.
After you set the value, press ENTER to
see the screen display after increasing the
contrast.
Then press ENTER and decrease the
contrast to -10.
Press ENTER to see the screen display
after adjusting the contrast to -10.
Press ENTER to go to Back-Light time
setting screen.
Press Up or Down to adjust the setting
value.
When the setting value is 0 Min, the
backlight stays on.
When the setting value is 10 Min, the
backlight turns off in 10 minutes.
Press ENTER to go to the Text Color
setting screen.
The default value is White Text.
Press Up or Down to adjust the setting
value, and then press ENTER.
The setting value changes to Blue Text.
Advertisement
Table of Contents
