Table of Contents
Advertisement
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F170
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F172
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F173
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F174
Action
Related Parameters
Reset Method
Action and Reset
Stops urgently
N/A
Resets automatically after three seconds
Fault Name
SY door unlock output
Fault occurs when SX2 door unlock detection signal is
sticking
not OFF after SY door unlock output deactivates (OFF)
Action and Reset
Stops urgently
MI=62 SX2 (Door unlock output feedback)
Switch to the manual mode to press both the upward and downward operation
buttons simultaneously for more than five seconds, press the RESET key on the
digital keypad, press the external reset device, or power-on again (choose
either)
Fault Name
Fault occurs when neither the first one upward forced
Upward limit action
deceleration switch nor the lower leveling sensor (DZD)
activates after upward limit switch activates
Action and Reset
Stops urgently
MI=33 LSU (Upper limit switch)
Resets automatically when no fault is identified
Fault Name
Fault occurs when the difference between the position
Upward forced
and hoistway auto-tuning is larger than Pr.03-16 setting
deceleration 1
value after the first one upward forced deceleration
switch activates during upward running
Action and Reset
Stops urgently
Pr.03-16 (Position Difference Protection)
Resets automatically after five seconds
Fault Name
Fault occurs when the difference between the position
Upward forced
and hoistway auto-tuning is larger than Pr.03-16 setting
deceleration 2
value after the second one upward forced deceleration
switch activates during upward running
Action and Reset
Stops urgently
Pr.03-16 (Position Difference Protection)
Resets automatically after five seconds
14-15
Chapter 14 Fault Codes | IED-S
Description
Description
Description
Description
Advertisement
Table of Contents
