Delta IED-S Series User Manual page 398

Code# KPC-CC01 Display
F180
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
F181
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
F182
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
F183
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
F184
Action
Related Parameters
Reset Method
Fault Name
Not at the bottom floor Fault occurs when the elevator is not at the bottom floor,
as displayed though the floor displays it is at the bottom floor
Action and Reset
The elevator runs automatically to the bottom floor with speed at returning to the
main landing for adjustment after closing the door.
N/A
Resets automatically
Fault Name
Not at the top floor as Fault occurs when the elevator is not at the top floor,
displayed though the floor displays it is at the top floor
Action and Reset
The elevator runs automatically to the top floor with speed at returning to the
main landing for adjustment after closing the door.
N/A
Resets automatically
Fault Name
At the bottom floor but Fault occurs when the elevator is currently at the bottom
not as displayed floor, but the floor displays it is not at the bottom floor
Action and Reset
The floor automatically adjusts as the bottom floor
N/A
Resets automatically
Fault Name
At the top floor but not Fault occurs when the elevator is currently at the top
as displayed floor, but the floor displays it is not at the top floor
Action and Reset
The floor automatically adjusts as the top floor
N/A
Resets automatically
Fault Name
Fault occurs when speed is slower than 0.01 m/s for
Speed is slower than more than five seconds while not in the operations of
0.01 m/s manual mode, hoistway auto-tuning, or returning to top
and bottom floor for position adjustment.
Action and Reset
Stops urgently
N/A
Resets automatically after five seconds
14-17
Chapter 14 Fault Codes | IED-S
Description
Description
Description
Description
Description