Delta IED-S Series User Manual page 313

Chapter 12 Descriptions of Parameter Settings | IED-S
Setting
Value
106 SE1 (Front door safety edge)
107 SE2 (Rear door safety edge)
108 100KG (Light-duty switch)
109 LWX (Full-load switch)
110 LWO (Overload switch)
111 150% (Forklift overload switch)
112 TCI (Cartop inspection switch)
113 TCIU (Cartop inspection upward)
114 TCID (Cartop inspection downward)
115 HFD (With front door)
116 HBD (With rear door)
DTS1 (Front door motor temperature
117
switch)
DTS2 (Rear door motor temperature
118
switch)
119 TOEX1 (Front door over-torque)
120 TOEX2 (Rear door over-torque)
DOBOC1 (Cartop inspection front
121
door open button)
DOBOC2 (Cartop inspection rear door
122
open button)
DCBOC1(Cartop inspection front door
123
close button)
DCBOC2 (Cartop inspection rear door
124
close button)
125 BALWG (Balanced switch)
150 DCB1 (Front door close button)
151 DOB1 (Front door open button)
DOBH1 (Front door open extended
152
button)
153 INSIC (Car inspection switch)
MI Function
12-06-6
Description
The safety edge is touched when LED indicator is
ON. At this time, the door is unable to act when door
full close signal and doorlock signal activate.
Car load exceeds 100 kg when LED indicator is ON.
Elevator load is 85% larger than the rated load when
LED indicator is ON. The elevator does not respond
to hall call once this switch activates.
When LED indicator is ON, elevator load exceeds,
door remains open, buzzer bees, car displays
overload, and the elevator does not execute
re-leveling.
Elevator load is 150% larger than the rated load.
This is a forklift application function. When this
function is enabled, the elevator re-levels once
overload (LWO) activates. When 150% switch
activates, elevator door remains open, 150% buzzer
alarms, and the elevator does not execute
re-leveling. The registered call from car or hall is
cancelled.
Enters cartop inspection mode when LED indicator
is ON and enters automatic mode when LED
indicator is OFF.
Uses inspection upward operation when LED
indicator is ON.
Uses inspection downward operation when LED
indicator is ON.
Current floor at which the elevator is has a front door
when LED indicator is ON. This is used for elevator
with front and rear doors.
Current floor at which the elevator is has a rear door
when LED indicator is ON. This is used for elevator
with front and rear doors.
Motor temperature is normal when LED indicator is
ON.
Over-torque while closing door when LED indicator
is ON.
Executes cartop inspection door open test when
LED indicator is ON.
Executes cartop inspection door closing test when
LED indicator is ON.
Car weight is heavier than counterweight when LED
indicator is ON. Executes downward safety landing
when power is supplied by EPS.
Car weight is lighter than counterweight when LED
indicator is OFF. Executes upward safety landing
when power is supplied by EPS.
Front door close button is pressed when LED
indicator is ON.
Front door open button is pressed when LED
indicator is ON.
Front door open extended button is pressed when
LED indicator is ON.
Under car inspection mode when LED indicator is