Delta IED-S Series User Manual page 378

Code# KPC-CC01 Display
1117
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1118
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1119
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1120
Action
Related Parameters
Reset Method
Code# KPC-CC01 Display
1127
Action
Related Parameters
Reset Method
Warning Name
Warning occurs when Pr.03-59 (Door Unlock Board
Inspection,
Test) is set to 1, and the elevator is neither in an
Unqualified, Door
emergency operation mode nor in control panel
unlock board
inspection mode.
Action and Reset
Pr.03-59 (Door Unlock Board Test) is set to 0
Pr.03-59 (Door Unlock Board Test )
Resets automatically
Warning Name
Warning occurs when both the signals of layer door
Doorlock, Unqualified, safety hatch and gate safety hatch do not change to ON
Door unlock board within one second (Pr.03-59=1 while the door opens)
after setting Pr.03-59 (Door Unlock Board Test) to 1.
Action and Reset
Pr.03-59 (Door Unlock Board Test) is set to 0
Pr.03-59 (Door Unlock Board Test)
Resets automatically
Warning Name
Warning occurs when the functional test for door unlock
Door unlock board,
board is not finished within 120 seconds after setting
Test, Overtime
Pr.03-59 (Door Unlock Board Test) to 1.
Action and Reset
Pr.03-59 (Door Unlock Board Test) is set to 0
Pr.03-59 (Door Unlock Board Test)
Resets automatically
Warning Name
Door unlock board, Warning occurs when Pr.03-59 (Door Unlock Board
Under test Test) is set to 1.
Action and Reset
Force the multi-function output Door Unlock Contactor [SY] to output
Pr.03-59 (Door Unlock Board Test)
Resets automatically
Warning Name
Warning occurs when Pr.03-01 (Highest Physical Floor)
Highest floor warning is set to 1, or Pr.03-01 is smaller than Pr.03-02 (Lowest
Physical Floor).
Action and Reset
N/A
Pr.03-01 (Highest Physical Floor), Pr.03-02 (Lowest Physical Floor)
Resets automatically
13-3
Chapter 13 Warning Codes | IED-S
Description
Description
Description
Description
Description