Table of Contents
Advertisement
Chapter 12 Descriptions of Parameter Settings | IED-S
04 = '4'
05 = '5'
06 = '6'
07 = '7'
08 = '8'
09 = '9'
10 = 'A'
11 = 'B'
12 = 'G'
13 = 'H'
14 = 'L'
15 = 'M'
16 = 'P'
17 = 'R'
18 = '-'
19 = ' '
20 = 'X'
21 = up_icon
22 = down_icon
Parameter Group 08 sets the displayed value for each floor. The first two digits (XX) are the tens
digit of the displayed value; the last two digits (YY) are the units digit of the displayed value.
For example, if you need to display the basement first floor as "B1", set XXYY to "1101".
12-08-4
Advertisement
Table of Contents
