Table of Contents
Advertisement
Chapter 14 Fault Codes | IED-S
Reset Method
Code#
KPC-CC01 Display
F149
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F150
Action
Related Parameters
Reset Method
Code#
KPC-CC01 Display
F151
Action
Related Parameters
Reset Method
Press the upward or downward operation button for the manual mode, press the
RESET key on the digital keypad, press the external reset device, or power-on
again (choose either)
Fault Name
Fault occurs when BY2NC (Brake-2 contactor
BY2NC ON detection
detection) signal is not OFF after brake contactor
error
activates (ON)
Action and Reset
Stops urgently
MI=28 BY2NC (N.C. contact of Brake-2 contactor)
Press the upward or downward operation button for the manual mode, press the
RESET key on the digital keypad, press the external reset device, or power-on
again (choose either)
Fault Name
Fault occurs when the breaking force test is unqualified,
Unqualified braking
or when switching the manual/auto mode to auto mode
force test
before the braking force test is qualified.
Action and Reset
Stops urgently
Pr.03-60–Pr.03-67 (parameters relate to braking force test)
1. When the braking force test is unqualified:
Switch to the inspection mode to press both the upward and downward
operation buttons simultaneously for more than five seconds, or switch to
the inspection mode to press the external reset device, or switch to the
inspection mode to press the RESET key on the digital keypad.
2. When switching the manual/auto mode to auto mode before the braking
force test is qualified:
Switch the manual/auto mode to manual mode.
Fault Name
Fault occurs when SWNC operation contactor detection
Operation contactor
signal is not ON after SW operation contactor
sticking
deactivates (OFF)
Action and Reset
Stops urgently
MI=26 SWNC (N.C. contact of operation contactor)
Resets automatically once the SWNC operation contactor detection signal
changes to ON
14-10
Description
Description
Description
Advertisement
Table of Contents
