Advertisement
At level one, the event is displayed in the relative area (B2), while the MENU screen moves to the right-hand
side of the display and contains only the main options.
From level two, the new event is displayed over the MENU screen.
In all levels, the MENU functions cannot be accessed when a new event is displayed, and are therefore
displayed with greyed-out backgrounds.
At the end of the display cycle for the new event, the MENU level active prior to the new event is restored.
Whenever the MENU function is enabled, the last function enabled will be displayed automatically
in "reverse" mode; this applies in all MENU levels.
Dimming (Backlighting) setting adjustment:
The driver may adjust the backlighting brightness of the TFT display via the relative MENU function.
If the MENU screen in not enabled, the driver may still adjust the backlighting by pressing the UP/DOWN
buttons directly.
The brightness of the warning lights are not adjustable (brightness always 100%).
At Key-on, the display, speedometer and tachometer (with the exception of the version with yellow or white
background, which is always off in daytime mode) and the respective pointers are set to 100% brightness
(daytime brightness) and only the TFT display brightness level is adjustable. The new setting is
memorised and maintained at subsequent key-ons in daytime conditions.
The dimming function may also be used with the vehicle in motion.
Advertisement
