Advertisement
Refitting the Front Roof shell
Tightening torque
Front Roof shell - roof kinematics
The following is the Front Roof shell refitting procedure for the right-hand side of the vehicle; repeat the
procedure on the left-hand side of the vehicle.
As mentioned previously, retrieve the fork shims
(2) for Front Roof shell height adjustment (Z
Axis), to ensure that the shell is reinstalled in
its original position.
M8x20 screw
Fit the Front Roof shell (A) in the relative seat on
the kinematics. If reinstalling the original Front
Roof shell, use the markings made during
removal as reference.
Hand tighten the three fastener screws (1), fitting
any shims necessary (2).
When refitting the same Front Roof shell, use
the original shims.
When fitting a new Front Roof shell, reuse the
original shims as an initial guideline.
Hand tighten the three fastener screws (1)
Nm
Class
24 Nm
B
Advertisement
