Advertisement
Remove the right hand headliner tensioner cable
(G) from the roof kinematics and from the
Rear Roof shell, undoing the screws indicated.
Repeat the above procedure for the left hand
headliner tensioner cable (H), but detaching
the spring (5) from the strap instead of
undoing the indicated fastener screw on the
Rear Roof shell.
The indicated screw cannot be removed as it is
obstructed at the top left by the sensor, as
shown in the photo aside.
Remove the right hand headliner tensioner cable
(G) from the Front Roof shell, undoing the
indicated screw, and undo the screw (6)
fastening the strap of the headliner flap onto
the roof kinematics.
Repeat the procedure on the left side of the
RHT.
Advertisement
