Advertisement
Refit the luggage compartment trim panels (
Refit the luggage compartment lid trim panel.
Connect the battery (
Replacing the emergency luggage compartment lid release mechanism
Tightening torque
Fastening emergency luggage compartment lid
release mechanism
Located on the inner side of the luggage compartment lid, under the luggage compartment lid trim panel.
Remove the luggage compartment trim panels (
Remove the luggage compartment lid trim panel.
F2.01).
Disconnect the connector (1).
Detach the cable (2)
Undo the three screws indicated fastening the
luggage compartment lid lock (A).
Remove the luggage compartment lid lock (A)
from the relative seat and replace.
Fit the new luggage compartment lid lock (A) in
the relative seat.
Partially tighten the three screws indicated
fastening the luggage compartment lid lock
(A).
The lock must still be moveable by hand.
Close the luggage compartment lid.
This causes the luggage compartment lid lock
(A) to align automatically with the striker
plate.
Tighten the three screws indicated fastening the
luggage compartment lid lock (A).
Tightening torque
Screw
Attach the cable (2).
Connect the connector (1).
E4.07).
Screw
E4.07).
Nm
Class
20 Nm
Nm
Class
2 Nm
C
A
Advertisement
