Advertisement
Replace the Tonneau Cover hydraulic cylinders (
Refit.
Refit the RHT hydraulic system pump (
Only after refitting the left hand Tonneau Cover kinematics.
Refit the luggage compartment trim panels (
Refit the rear trim panel.
Tighten the two rear screws (3) fastening the
Tonneau Cover kinematics (A).
Tightening torque
M8x50 screw
Tighten the front fastener screw (2) for the right
hand Tonneau Cover kinematics (A).
Tightening torque
M10x75 screw
Attach the clip (5) fastening the right hand flap
control cable (B) to the right hand Tonneau
Cover kinematics.
Attach the spring (4) for the right hand flap
control cable (B) to the right hand Tonneau
Cover kinematics.
Refit the safety clip (1).
E6.12).
E6.12).
E4.07).
Nm
Class
20 Nm
A
Nm
Class
43 Nm
B
Advertisement
