Advertisement
2+2 Version ONLY.
Thread the rear seat belt (B) through the rear
seat belt guide (E).
Hand tighten the two screws indicated fastening
the lower part of the rear seat belt guide (E).
Fit the rear seat belt guide (E) into the relative
seat on the upper lateral trim panel.
Hand tighten the screw (13) fastening the rear
seat belt guide.
Tighten the rear fastener screw (12) for the
upper lateral trim panel.
Tightening torque
Screw
Refit the seal (11) on the upper lateral trim panel,
ensuring that it fits flush with the panel.
Nm
Class
10 Nm
B
Advertisement
