Advertisement
After moving the vehicle to a suitable location, ACTIVATE the Park Lock as follows.
If the Park Lock does not activate, the vehicle will function correctly but at the next key-off, the device will
not activate and the vehicle will only be held in position by the electric parking brake, if engaged.
If the electrical system is sufficiently functional,
turn the ignition switch to ON and check that
the letter "N" is shown on the DCT gearbox
display.
Fit the hex head wrench (A) Part No. 251415 into
the seat on the mechanism and ENGAGE the
Park Lock by turning ANTICLOCKWISE
completely.
If the electrical system is sufficiently functional,
turn the ignition switch to ON and check that
the letter "P" is shown on the DCT gearbox
display.
Advertisement
