Advertisement
With cylindrical roller only
Insert the feeler gauge
right-hand side of the hook (B) and the striker
plate (A).
If the feeler gauge does not fit, the striker plate
must be adjusted as the lateral position of
the striker plate (along the "Y" axis) is
incorrect.
With cylindrical roller only
Insert the feeler gauge
left-hand side of the hook (B) and the striker
plate (A).
If the feeler gauge does not fit, the striker plate
must be adjusted as the lateral position of
the striker plate (along the "Y" axis) is
incorrect.
For "hourglass" roller (NEW SOLUTION)
Visually centre the lateral position (along the "Y"
axis) of the striker plate, so that the vertical
centreline of the roller (2) is perfectly aligned
with vertical centreline of the hook (B).
(AV
8181) between the
(AV
8181) between the
Advertisement
