Advertisement
Remove the rollbar (
F4.05).
Working from the luggage compartment, fit the
rear mounting bar
Roof shell kinematics and fasten on the right-
hand side by tightening the indicated screw
completely.
Fasten the rear mounting bar
the Front Roof shell kinematics on the left-
hand side by tightening the indicated screw
completely.
Fit the pump mounting bracket over the ribbing
on the rear roof mounting bar as shown in the
photo.
Working from the passenger compartment, fit the
front mounting bar
Roof shell kinematics and fasten by tightening
the two screws indicated completely.
(AS
107570) for the Front
(AS
107570) for
(AS
107568) for the Front
Advertisement
