Download Print this page

Ferrari California Workshop Manual page 1156

Hide thumbs Also See for California:

Advertisement

Do not adjust the rear view mirrors while the vehicle is in motion.
When reverse is engaged, the driver may adjust the passenger side rear view mirror into a different position
than the one used in normal driving to facilitate parking manoeuvres. This position may be memorised by
pressing the driving position memory buttons (E5.16, "Driving positions").
If a personalised reverse position for the rear view mirror has not been memorised, when reverse gear is
engaged, the external rear view mirror will still move slightly downwards and inwards (relative to the
normal driving position).
Replacing the external rear view mirror adjustment control
Remove the door panel (
E3.08).
To adjust the driver side external rear view
mirror, rotate knob (1) by 45° to the left and
push in the desired direction of adjustment to
set the mirror position required.
To adjust the passenger side external rear view
mirror, rotate knob (1) by 45° to the right and
push in the desired direction of adjustment to
set the mirror position required.
Rotate knob (1) by 180° to fold both external rear
view mirrors inwards.
Undo the three screws (1) fastening the
mounting bracket (A) for the external rear
view mirror adjustment control (B) to the door
panel.
Remove the mounting bracket (A) for the
external rear view mirror adjustment control
(B) from the door panel.
Undo the two screws (2) fastening the external
rear view mirror adjustment control (B) to the
respective mounting bracket (A).
Remove the external rear view mirror adjustment
control (B) from the respective mounting
bracket (A) and replace.
Fit the new external rear view mirror adjustment
control (B) onto the respective mounting
bracket (A).
Tighten the two screws (2) fastening the external
rear view mirror adjustment control (B) to the
respective mounting bracket (A).
Fit the mounting bracket (A) for the external rear
view mirror adjustment control (B) in the
respective seat on the door panel.
Tighten the three screws (1) fastening the
mounting bracket (A) for the external rear
view mirror adjustment control (B) to the door
panel.

Advertisement

loading