Advertisement
Engaged gear (DCT gearbox);
"Auto easy exit" gearbox mode (DCT gearbox);
"Performance Start" message (DCT gearbox);
AVH system enabled (DCT gearbox);
Vehicle speed display (mechanical gearbox);
"Shift Light Indicator" message.
Information concerning the gearbox is always displayed in all operating conditions.
Gear engaged depending on the "manual" or "automatic" mode (DCT gearbox)
When the DCT gearbox is in AUTOMATIC mode, the DOT MATRIX display reads "AUTO" along with the
letter indicating the relevant gear currently engaged: D (Drive), N (Neutral), R (Reverse).
At key-off, if the panel receives the Neutral value, the DOT MATRIX display will read N. If the panel receives
a gear engaged value for any gear other than Neutral, the display will show the gear engaged.
When gears are selected via the two shift paddles on the steering wheel with the DCT gearbox in MANUAL
mode (F1), the number corresponding to the currently engaged gear is shown on the DOT MATRIX
display, as follows: 1, 2, 3, 4, 5, 6, 7.
"Auto easy exit" gearbox mode (DCT gearbox)
Advertisement
